Senix cordless woodworking solutions consists of 36V brushless motor technology in its core and includes six main tools as a standard.
SF-360 wireless circular saw: The cutting depth can be as high as 85mm (hardwood), the no-load speed is 5,200RPM, torque deviation is ≤5%, and cutting efficiency is 42% higher than the standard 20V tool. It comes with a 4.0Ah lithium battery and has an uninterrupted continuous cutting of pine wood boards (20mm thickness) of 130 meters, and the charging duration for the first time is 18 minutes (FastCharge Pro technology).
DR-36X impact electric drill: It has a maximum torque of 120Nm. For making a 16mm diameter hole in concrete, the rate of penetration is 8mm/s (industry standard is 5.5mm/s). In addition to the intelligent chuck system, the time for tool change is shortened from 3.2 seconds to 0.9 seconds.
Finishing tool set includes:
PT-360 aircraft electric planer: Cutting width 82mm, maximum depth of planing 3mm, blade life up to 35 hours (22 hours for standard carbon steel blades), surface roughness Ra of machined pine wood ≤6.3μm.
OS-36 track saw: The straightness of cut error is ±0.15°/meter. With a 55mm deep guide plate, it can cut oak countertops (40mm thick), and the thickness of the carbonized layer at the cut edge is ≤0.03mm (laser detection data).
Auxiliary equipment enhances productivity:
NB-36 cordless nail gun: Its rate of 18GA straight nail firing is 3 nails per second, it can fire sequentially 1,200 times (with a 4.0Ah battery), and has a nail head embedding accuracy of ±0.5mm. The Canadian Woodworking Society test report shows that efficiency in gypsum board installation has increased by 27%.
BS-36 belt sander: The size of the sand belt is 75×533mm, variable speed range 500-1,100RPM, dust collection rate is 98.7% (with the HEPA filtration system), and sandpaper replacement frequency is reduced by 33% with respect to wired equipment.
The battery system achieves cross-platform compatibility: Senix cordless woodworking solutions 36V/4.0Ah battery is universal across the entire series of tools, with a cycle life of up to 1,200 times (capacity retention rate ≥80%), and enables working in an environment between -20℃ and 50℃. This battery’s full-load temperature rise, as confirmed by German TUV tests, is ≤22℃ (industry safety standard of 35℃), and the chances of the overheat protection kicking in are reduced by 89%.
Intelligent connection enhances management efficiency: With the ToolHub Bluetooth module, tool load rate (e.g., DR-36X motor temperature and current oscillation), battery remaining life (accuracy ±3%) can be monitored in real time, and predicted replacement cycle of tools can be established. Actual measurement data from United States residential builders show that the tool idle rate has dropped from 31% to 9%, and the project duration has been shortened by 18%.
Market validation data: In the 2023 North American professional woodworking survey, Senix cordless woodworking solutions’ customer satisfaction rate also stood at 94%. Among them, the failure rate of SP-360 circular saws in the hardwood cutting mode was only 0.7 times per thousand hours (the market average was 2.1 times). Its modular design saves 65% of tool changing time and 42% of site space occupation, creating a new benchmark of efficiency for cordless woodworking systems.